- 本站编辑：杭州兴顺机械有限公司发布日期：2018-09-28 15:20 浏览次数：
1. Compared with other products, the ball screw elevator is designed at the side, because there are many balls rolling between the screw shaft and the screw mother with a driving moment of 1/3, so it can get higher motion power. Compared with the sliding screw pair in the past, the driving moment is less than 1/3, that is to say, the driving force needed to achieve the same results is 1/3 of the rolling screw pair. It is very helpful in saving electricity.
2. High rigid ball screw without backlash can be pressurized, because the pressure can make the axial clearance reach negative value, and then get higher rigidity. Ball screw is applied to mechanical equipment and so on by adding pressure to the ball, because the repulsion force of the ball can enhance the rigidity of the mother silk.
3. High-speed feeding may be the reason that ball screw can complete high-speed feeding (movement) because of its high power and low heat.
http://www.baidu.com 百度 http://www.kongjianzhanshi.com 上海展厅设计公司